Hanna Instruments offer the most advanced pens on the market today. The pHep4 pH/Temperature Waterproof Pen has a .01 ph resolution. The Dist5 EC/TDS Pen is unmatched in EC/TDS/Temperature measurement. The Combo pH/EC/TDS/Temperature Pen offers highly advanced accuracy with a single tester. All Hanna Instruments pens offer replaceable graphite electrode, temperature in °C or °F, automatic temperature compensation with adjustable battery level indicator, stability indicator, automatic shut-off and automatic calibration all in a floating waterproof casing.
Seize the Day with HAPPY! Pharmacist-formulated with our organic, All-American, 100% THC-FREE hemp oil, HAPPY is infused with a variety of potent nutraceuticals with benefits that provide all-day, mood-boosting support. We start with a range of B-vitamins to energize your body and pick up your spirits, then add potent amino acids & compounds like GABA and 5-HTP, and popular nutraceuticals like Bacopa and St. Johns Wortwidely taken to help improve relaxation and concentration. We combine all that with a gentle, 10mg dose of our finest hemp extract in convenient vegan-friendly capsules for once-a-day consumption.
The HLC-2e by Custom Automated Products protects your light from Hot Starts." A "Hot Start" is when your ballast attempts to resart the bulb without waiting for the bulb to cool off. The HLC-1e constantly monitors the power going to your light. In the event of a power failure, it will not allow the light to restart until 15 minutes after the power is restored. This prevents your light from attempting to "Hot Start" your bulb, preventing bulb damage and increasing bulb life. The HLC-2e is rated at 15 amps @ 120 volts. 3 year warranty.
HM Digital introduces its new AquaPro series, a line of handheld TDS/EC meters with a sleek design that's perfect for today's modern kitchen. The AquaPro digital water testers are the next generation for today's tech-savvy and health-conscience consumer. FEATURES Measures total dissolved solids (TDS) and temperature. Automatic Temperature Compensation (ATC) Water-resistant housing Measurement Range: 0-5000 ppm Digital Calibration (push button) Auto-off function, data-hold function and low-battery indicator. Display: large and easy-to-read LCD screen includes simultaneous temperature reading. Factory Calibrated: The AquaPro is calibrated with a 342 ppm NaCl solution. The meter can be recalibrated with digital calibration using the push buttons, rather than a screwdriver. Includes a cap and batteries. Comes in a retail-oriented package.
Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver. Perfect for both consumer or commercial use. Carry one in your pocket or toolbox at all times! Features Ideal for commercial use. Includes a carrying case with belt clip. Highly efficient and accurate due to its advanced microprocessor technology. Hold Function: saves measurements for convenient reading and recording. Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Built-in digital thermometer Display: large and easy-to-read LCD screen. Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Also available in "x10" mode: reads in increments only of 10 ppm (0-9990 ppm).
The HPR-1 is a hardwired 30 amp capacity, 230 volt version of the UPM-1. The HPR-1 is perfect for controlling higher loads such as large air conditioners or multiple HID ballasts. You supply 240 volt power to the input side of the HPR-1. The air conditioner or ballasts to be controlled are then hard-wired into the output side of the relay. The 16 foot trigger cable coming from the HPR-1 is then connected to your control device such as a time clock, thermostat or environmental controller. When the device applies power to the trigger cable, the relay in the HPR-1 applies power to the connected equipment. The HPR-1 is rated at 30 amps @ 240 volts. 3 years no hassle warranty.
With B1, one of the most powerful bloom enhancer available. Induces flowering and stimulates resinous oil and fragrance production in many flowers and medicinal herbs. Works well with all popular nutrient lines.
If you’ve been impressed by the immediate and powerful effect of G10 on the size and density of your flowers, wait till you add DEEP BREATH to your feeding regimen. Our honey and vitamin based cocktail, DEEP BREATH, “primes the pump” during the vegetative and early bloom stage so plants experience an explosive surge in bulk when G10 is applied beginning the 3rd week of bloom. The DEEP BREATH/ G10 combo boosts yields to unheard of levels. Even beginners will see incredible effects in 10 days. Use 1 teaspoon per gallon every feeding beginning in veg and continue through the second week of bloom. Use ½ to 1 teaspoon per gallon in hydro. For even better results foliar spray clones with ½ teaspoon per gallon every other day. Fasten your seatbelts! BLOW IT UP!
Deep Fusion Bloom featuring Molasses blended with standard NPK chemical fertilizers, provides growing plants with large amounts of Phosphorus and Potassium for blooming flowers. Deep Fusion Bloom, when mixed with Deep Fusion Micro & Deep Fusion Grow, according to the feeding chart, will promote vigorous foliar, stem and branch growth in the early part of the growth cycle and induce flowering and stimulate essential oil and fragrance production in the bloom part of the cycle. For best results: Maintain PH between 5.8 and 6.9. If plants show signs of stress reduce nutrient strength. Always add Deep Fusion Bloom to water first and stir well before adding Deep Fusion Grow or Deep Fusion Micro. Never mix concentrated nutrients together.
Deep Fusion Grow also contains Molasses with addition of Kelp.They are blended with standard NPK chemical fertilizers to help promote vigorous growth during the foliar growth phase. Deep Fusion Grow, when mixed with Deep Fusion Micro & Deep Fusion Bloom, following the feeding chart, will promote vigorous foliar, stem and branch growth in the early part of the grow cycle and induce flowering and stimulate essential oil and fragrance production in the bloom part of the cycle. For best results: Maintain PH between 5.8 and 6.9. If plants show signs of stress reduce nutrient strength.
Deep Fusion Micro contains Molasses blended with standard NPK chemical fertilizers, provides growing plants with large amounts of Nitrogen as well as necessary micro nutrients and trace elements. Deep Fusion Mirco, when mixed in your resevoir with Deep Fusion Grow and Deep Fusion Bloom, according to the feeding chart, will promote vigorous foliar, stem and branch growth in the early part of the grow cycle and induce flowering and stimulate essential oil and fragrance production in the bloom part of the cycle. For best results: Maintain PH between 5.8 and 6.9. If plants show signs of stress reduce nutrient strength. Always add Deep Fusion Micro to water first and stir well before adding Deep Fusion Grow or Deep Fusion Bloom.
G 10 (Gravitation #10) started as an experimental substitute for Gravity but turned into something else. The original proprietary kelp extract as been brought to the next level. Use with Sonic Bloom and Killer Tea for maximum finish.
